Looking for:
Looking for:
Autodesk autocad 2018 commands free
After installing Bonus Tools, an additional pull-down menu will be added to the end of the main Maya menu. This menu provides easy access to a variety of tools and utilities for daily use. Maya Bonus Tools has been organized to mimic the layout of the standard Maya menu sets.
Each sub-menu contains a number of related tools. Each of these can be torn off and floated just like standard Maya menus. Before installing BonusTools , older versions of Maya BonusTools should be uninstalled first in order to avoid conflicts. Hello everybody. I have Maya I have installed the bonustools but the menu does not appear. I am very interested in speedcut. The updates take too long after new versions and the tools could be bundled with the software or at least with more constant version independent updates.
I downloaded this specifically for the Poly Volume. It works great. Make sure you enable the “Measure” Plug in so the Poly Volume will be accessible because by default it is grayed out and requires the Measure Plug in. Speedcut disappeared after open and never seen again i try script given in coment ,reinstall bonus tool but diden’t work what should i do?
Excuse me but, why plug-ins ” pointOnMeshInfo. I can’t see it in Plug-in Manager. Despite having a clean install and running the plug in install it somehow doesnt whow up and i cant activate it either in the plug in manager. I download the latest version of the bonus tool for MAYA , cannot find sweep mesh at all.
Installed Bonus Tools in Maya The obsolete versions of the tools’ Curve to ribbon’ and’ Curve to Tube’ are still present, there is no Speedcut, weight editor, or any of the other new features. Furthermore, the green new feature highlight appears on additions from the previous bonus tools collection. Also, I have downloaded, installed, and uninstalled these tools multiple times, on a fresh install of maya with no change. Time Warp Animation which is why i installed worked as needed.
PolyTools When I activate sun. Sweep Mesh is not a stable or flexible enough replacement for Curve to Ribbon Mesh. Sweep Mesh has tripled my work time for the same task due to having to fiddle with UV’s for each individual hair card and being unable to smoothly work with more than one mesh at a time.
I have the same issue, the new tools don’t appear, tried uninstalling and reinstalling multiple times. Would be so ossom to have this amazing plugin in Maya Do you have any idea when could we have it there too? There are many ready-in tools, especially ‘Reverse Animation’ is a great tool.
Thank you very much. Hello everyone, i get this error whenever i try to use flatten components I just installed the bonus tool but there are missing some option, like in modeling slide components is missing and also draw split and draw reduce.
It was working for me for a while. But then just stopped suddenly. Previous value will be overwritten by explicit initializer. I wanna too support for Maya , because i ‘m a beta tester of Maya, so we have already. Would be great to have bonus tools for it already, but i don’t believe they will do it.
I have a lot of fatal error when I change the options of this tool I want to see my shaders library vray, arnold, maya shaders : no icons. Any way to see them? This crash bug has been fixed in the latest version of BT. This fix should work in both Maya and Maya Otherwise icons can been created and viewed for any mb, ma or fbx file.
LayoutTools Browser Doesn’t Work!!! With a lot of fatal error due to the Browser and I can’t see any icons in it.. This has been addressed in the latest version. The fix should work in both Maya and Maya Go into the Plug-in Manager and load the xgenToolkit. The auto unwrap UV’s tool should work fine afterwards. Disabled it? Crashes every time I change icon size in the layout window tried on different computers. Images displayed in icons are not scaled so appear cropped. Works fine in , but I also want it to work in , which is also installed on my Mac, but the “universal installer” provided ignores it, and does not install bonus tools to the older installed version of Maya.
Please we need the version of this plugin! I think the bonus tools should be part of each Maya releases. Item Detail. Autodesk Maya Bonus Tools Autodesk, Inc.
Digitally signed app. Mac OS Win64 Linux. Read Help Document. About This Version Version Screenshots and Videos. Customer Reviews. Ken Huling June 03, Timothy Handy July 14, This is Autodesk.. Please update for MAYA Thank you in advance. Richardson Cussney October 08, You have to set the interface in animation mode to see the Bonus Tools menu :. Please fix. Andrey Gaman September 07, Same problem here. I had the same problem. Ugonier Gotix July 09, Load once and disappear.
Haven’t been able to load it back again after re installing. Anthony Pham June 01, Not seeing SpeedCut in the menus in Joe Wu June 04, Aaron Aidoo June 10, Oh boi now we are talking modeling hard surface in maya fast :. Niranjan Reddy July 21, Mihai Alex July 28, Zsolt Sulyok April 07, Vikram Naik March 08, Manojlo Gulic February 17, I can seem to find out howto install this.
Would appreciate help. Installed bonustools , and when i open my scene files, everything is empty. Sent message to tech support but never heard back. Have you dropped support for Maya LT altogether? Kamal Khanal July 30, Did it work in Maya LT? Feras Ashkanani June 09, Request support for Maya version.
AutoCAD Keyboard Commands & Shortcuts Guide | Autodesk
All rights reserved. Email is required Entered email is invalid. Contact sales at See product details. Collapse all. Expand all. Hide similar features Show similar features. Detailed concept autodesk autocad 2018 commands free. Advanced geometric views. Edit scans with raster and vector tools. Shape generator. Assembly modeling. Mechanical concept and layout design. Mesh modeling.
Surface modeling. Parametric modeling. Tube and pipe design. Direct modeling. Component generators and calculators. Freeform modeling. Print batches of drawings. Print batches of multiple product drawings. Xref compare. Smart annotation tools. Detect and comply with CAD standards. Compatible for 3D printing. Architecture Drafting Standards. Content center.
Exploded views. Unlimited access. Import, export models. Shared view collaboration. User autodesk autocad 2018 commands free. Global share. Team participant. Import, export blocks. Import, export drawings. Import and convert PDFs. Attach, edit, display point clouds. Cloud and mobility. Access, view, or edit remotely. Publish, share, and collaborate online. Works with popular autodesk autocad 2018 commands free источник. Web app.
Mobile app. Annotate dwg files in airplane aitocad. Simulation and visualization. Exploded views and жмите. Stress analysis. Cloud simulation. Compare results. Static stress. Modal frequency. Non-linear Stress. Event simulation. Shape optimization. Dynamic motion simulation. APIs and automation. Create custom keystroke commands. AutoLISP programming and automation. Visual LISP functionality. Visual Basic applications.
Record repetitive keystroke sequences. Edit multiple object properties. Industry-specific object libraries. Complete API library for custom applications. Native, editable results. Cloud solve. Design configurations. Automated frame design. Sheet metal. Mechanical design. Design parts, assemblies, products. Intelligent tool palletes. Import conmands CAD geometry. Autodes, part updates. Assign parametric constraints for parts. Object materials and mass properties.
Automate bills of materials creation. Create panel layouts, schematic diagrams. Schematic capture. Use consistent project standards. Organize in a project-based structure. Wiring diagram error checking. PCB layout. Component library management. SPICE simulation. Electronics cooling. PCB design integration. Printed circuit board interoperability. Setup probing. Water jet, laser cutter, plasma cutter. Free Post Processor Library. Additive manufacturing. Fused filament fabrication. Associative autodesk autocad 2018 commands free.
Metal additive manufacturing. Model management. BIM interoperability.
AutoCAD Commands and Shortcut list [with PDF eBook] – Section heading
Alter the base point of a drawing without changing its origin. Add a parameter with grips to a dynamic block definition. Create a break or gaps in objects at one or two points. Explode a block but retain its attribute settings and layer definition. Open the Layer Properties Manage Palette which allows you to tweak the settings for layers.
Remove overlapping or unnecessary objects from your work. Alter the size of a piece of text so that it fits into the required space. Break up an object into its individual components—i. In the Customization Files box, select Keyboard Shortcuts.
In the Customization Files box, find Keyboard Shortcuts. Expand Keyboard Shortcuts. Expand Shortcut Keys. Drag the command under Shortcut Keys in the Customization Files box. Click the icon to the left of the command you just dragged over.
In the Properties box, click Access. In the Shortcut Keys pop-up box, enter the shortcut of your choice. Click OK. Select Command Aliases. Click the Add button to create a new shortcut. To overwrite the current default shortcut, click Yes. General Shortcuts.
Saves current drawing. Toggle coordinate display. Toggle grid. Toggle pick style. Cycle isometric planes. Toggle running object snaps. Toggle coords. Remove objects from a drawing. When the value of this system variable is set to 2, an overlapping icon and a menu containing a list of overlapping objects appear and you can select the required object from this list.
If you set the value of this system variable to 1, only the overlap icon appears not the menu. You can turn this off by changing the value of this system variable to 0.
Dynamic UCS can be activated or deactivated using this function key. Using this status bar option you can open Graphics configuration window which is used to change settings related to display and graphics properties of AutoCAD. General Commands. These are some of the commands which can be frequently used in your drawing workflow to improve your overall efficiency. You might be familiar with many of these commands but there are also some commands which are really helpful still they remain largely unused.
This command is useful for counting the number of blocks in your drawing. It reports the number of each instance of block used in the drawing along with its name. To count the block it should be visible in the drawing area. Using this command you can convert single line as well as multiline text into geometries. Using this command you can make infinite lines starting from the point of selection. When you trim or break this infinite line to a finite length it becomes a simple line geometry.
This command makes a single point geometry in the drawing. To modify the type of point created by this command you can use PTYPE command and choose the desired point type from Point Style window. Using this command you can make a revision cloud geometry by freehand sketching.
You can make a freehand sketch using this command. You can use Line, Polyline or Spline as the object type for making this freehand sketch. To cancel repetition of command press ESC key.
Use this command to copy nested objects from a block or Xref without exploding them. Using this subcommand you can perform calculations directly on the AutoCAD command line even when you are in the middle of a command. Explodes the block containing attributes retaining the attribute setting and its layer definition. This is especially helpful if you want to retain the text of attribute after exploding the block.
Using this command you can check the spelling of selected text and correct the spellings from Check Spelling window. This command can be used to write arc aligned text in AutoCAD. You can use this command to even write text aligned to a circle. More about this command can be found in this related article. This command can be used to restore the last deleted object in your drawing. After deleting an object if you made many other changes in the drawing and realized that you might need to restore the deleted object then simply type OOPS and press enter.
This command can be used to change the space of an object from model space to paper space and vice versa. See the animated image shown below for reference. You can use this command to divide any 2D geometry into many equal parts. At each point of division, a point geometry will be added on the 2D curve. If you need to rename any named object like layer, block or linetype simply use this command to rename it. This command can be used to break 2D geometries at one or two points.
It is helpful if you want to break a curve at the point of intersection with other curve or if you want to create a gap by breaking a part of the geometry. Using this command you can find a lot of information about your drawing like the date when the drawing was created and total editing time consumed on the drawing.
This command can be used to make the selection from your drawing with filters. As an example, you can use quick select to make a selection set containing all circles of the drawing with the radius of a particular value. It can be used to find the distance between two points in the drawing. You can paste the copied objects from clipboard to your drawing using this command. Using this command you can find lots of properties of an object like the layer they are on, area, length or radius, perimeter or circumference and a lot more.
To use this command simply type LIST on the command line then press enter and select the object from drawing area about which you want to know and press enter again. This command was introduced in AutoCAD version and it can be used to make most of the dimensions like Linear, aligned, radius, diameter and baseline. If you want to add a feature control frame representing tolerance related information in your drawing then you can use this command. Using this command you can change the scale of existing Text or Mtext object in the drawing.
When the scale of these text entities are changed the base point will remain fixed. Using this command you can change the base point of a drawing without changing its origin. This is especially helpful in the situation where you want to insert the drawing into another as a Xref. By default, AutoCAD takes origin as the base point which can be modified using this command without changing the origin.
Using this command you can change the text justification of Text and Mtext elements in the drawing. Using this command you can set the drawing units and other settings like the precision of linear and angular dimensions and default rotation angle. Using this command you can make a multiline geometry which contains multiple parallel lines. You can insert a block or a drawing as a block in the table using this command. I have made a simple table by importing blocks of design center as shown in the image below.
As the name suggests this command can be used to find the area of closed or open shapes in the AutoCAD drawing. To know more about finding the area in AutoCAD drawings refer to this related article.
Using this command you can reorient text entities in a best readable position. In image A below the text is oriented at different angles and in some of the situations, the text is not properly readable. This command can be used to find the coordinate values of a point in AutoCAD drawing. Using this command you can insert existing blocks of a drawing as a rectangular array component.
Using this command you can extract closed boundaries from any enclosed area. This boundary can be used to find the area of the enclosed region or for many other applications. This command can be used to make a dimension line inclined to a particular angle with respect to the positive side of the X-axis.
You can use this tool to make a Breakline symbol on a line. Select the starting and end points of the breakline then click at any point on the line to specify the location of breakline or directly press enter to place it exactly at the center of the line. Using this command you can convert a text object into a Mtext object and you can also combine multiple separate Mtext objects into a single Mtext unit. As the name suggests this command can be used to save all of the open drawings in AutoCAD window.
Performance Related Commands. There are many best practices that you follow to keep your AutoCAD software and PC in great working condition and there are also many inbuilt tools and commands in AutoCAD that help you in keeping the performance of your software properly optimized.
In this section, you will find all those performance and optimization related commands which you can use in your daily workflow. This command can be used to remove unused named objects like layers, blocks and dimension styles from the drawing. This command can also remove Defpoints layer and also layer containing objects but I would not recommend that. Using this system variable you can turn off or on the visibility of filled area in hatches or wide polylines by changing its value to 0 or 1 respectively.
You need to regenerate the drawing using REA command after changing this system variable to see its effect on the drawing. This system variable controls the area of influence of object snap. The aperture size as defined by this system variable is the area of the square under which the point will be selected if the cursor is brought into it. The default value of this aperture is 10 but depending on the complexity of the drawing you can change this value between The size of the aperture is relative to the current scale of the screen and it is not an absolute value.
In the image below the red box not visible in AutoCAD is the aperture size for two values 10 and 50 respectively. Use this command to remove overlapping or unnecessary geometries from the drawing. You can change the value of this system variable to reduce the time it takes to save a drawing. This system variable also affects file size of AutoCAD drawings and its compatibility with other softwares.
By decreasing the value of this system variable you can increase its compatibility with other softwares and it also decreases the size of the CAD file but the time consumed in save operation generally increases. When you increase the value of this system variable opposite happens.
The default value of this system variable is 50 and it can be changed from 0 to When hovering the cursor over any object a preview will appear if the value of this system variable is set to 3.
You can remove this preview thereby improve the performance by changing the value of this system variable to 0. Its default value is 1 but you can turn off this highlight effect by changing its value to 0. Using this command you can change the layers of selected objects. To use this command type LAYMCH on the command line and press enter key then select objects whose layer assignment you want to change and press enter then select any object of the layer which you want to apply on selected objects and press enter key again.
Using this system variable you can change the size of Pickbox which appears at the cursor of AutoCAD. The default value of this system variable is 3 and you can change its value from 0 to In the image below the size of Pickbox is 3 for first cursor and 10 for the second cursor. This system variable will toggle the visibility of start tab at the beginning of the AutoCAD application.
AutoCAD will prompt you with the save dialogue box before closing all unsaved drawings and it will take you to start screen after closing all of the drawings. This system variable suppresses the dialog box that opens up when invoking certian commands like Save, Save As and Export. The default value of this system variable is 1 which allows the dialog box to open.
When you, however, change the value of this system variable to 0 the command will run on the command line and the dialog box will not open. This command should be used for removing errors from your drawing. More about drawing repair tools can be found in this related article. This command is a great time saver if you want to copy properties of one object on other without changing its geometry or contents. Using this command you can close all open drawing windows except the current drawing window.
Using this command you can shrink or expand the text entities in a drawing to fit in the required area. This command is a great time saver if you want to copy properties of one object on another without changing its geometry or contents. As the name suggests you can add a centerline easily between parallel or intersecting lines using this tool. See the related article for more on Centermark and Centerline tools.
This tool was added in the AutoCAD version and it allows you to create center mark easily on a circle or arc. Using this command you can change the layers of selected objects. To use this command type LAYMCH on the command line, press enter key, select objects whose layer assignment you want to change, press enter, select any entity of the layer you want to apply to selected objects, and press enter key again.
Using this command you can check all the objects which are on a particular layer. When you use LAYWALK command a list with all layers appears on the screen and you can click on any of the layer s from the list and objects from that layer s will only become visible in the drawing area.
This tool can be used to modify the attribute information of blocks containing attributes. Using this command you can select objects which are connected to the selected object in the drawing area.
This selection series continues as long as the command finds connected objects. Using this command you can bring TEXT, Dimensions and Leader lines on the front of all underlying objects like hatches.
This command is especially helpful if you want to bring multiple annotations to the front of all drawings objects without changing their draw order selectively. Using this command you can hide all objects from the drawing area except the selected objects. By hiding unnecessary objects from drawing you can get a clean work area.
Using this command you can group multiple objects as a single unit. This command is great for making groupings of the similar type of objects like a group of similar blocks. This command can be used to bring the Design Center palette to the drawing area. Fields are dynamic text information which can add a lot of intelligence to your drawing by keeping data interlinked and updated.
Fields are extensively used in the sheet set and layout drawings and they can be used to automate a lot of information in AutoCAD drawings. Using this command you can import drawings of many different formats in AutoCAD, the list of all supported formats is shown in the image below.
If you want to export a certain part of your drawing or any of its blocks to an external file then you can use write block tool or its command equivalent WBLOCK. Using this command you can print multi-sheet files directly, unlike PLOT command which only plots single sheet this command will allow you to plot multiple sheets or even all of the sheets of the drawing directly.
Using this command you can add bullet points and numbered lists along multiple rows of the text. This command is used to transfer properties like lineweight, transparency, layer, color and more from one object to another. This command changes the scale for the Line Type and applies throughout the drawing. The current coordinate of a point can be determined using this command. This allows the user to save the drawing to a different file format as shown in the following image.
Using this command the user can measure the distance , radius,area and volume of the selected object. The drawing can be exported and saved as a PDF file by using this command. This command opens up an external reference palette and you can use it to attach DWG, PDF or images in your drawing as external references.
This command allows us to edit the block and its parameters. This command will take the user to an exclusive block editor window where all the changes can be made and saved in the block. Call out or leaders can be placed in the drawing by using this command. Using this command you can compare two versions of the same drawing and all the changes in it. Using this command you can record the repetitive actions in your drawing and replay them again to automate the entire process without having to write the macros.
Using this command you can share your drawing using a URL with the Autodesk cloud. The recipient can view the drawing without using AutoCAD software in a browser. Using this command you can show the history of a drawing and all the changes made to it. This command will work only when you save your drawing using a cloud service like Box, Dropbox or OneDrive.
You might be familiar with many of these commands but there are also many commands which are not frequently used despite their great features. This command extends the 2D object to the third axis which is the Z axis, so as to convert it into 3D.
This command helps the user to create a 3D solid by revolving a 2D region around an axis. Using this command you can sweep a 2D geometry along a path. The following image shows an object created with sweep. This command will create a 3D box shape without using any 2D base sketch. A 3D solid cylinder can be made using this command. Here the user has to provide the radius or diameter of the base and then provide the height of the object.
The user first has to provide the base dimension and then provide the height of the pyramid. Using this command you can join two or more 2D curves to make a lofted 3D object. In the following image red 2D curves were used to create this lofted 3D. Using this command you can convert a surface into a 3D solid by adding thickness to it. Using this command you can convert 3D mesh and watertight objects made with surfaces to 3D solid and you can also control whether converted solid is smooth or faceted.
Using this command you can make a 3D wall-like shape as shown in the image here, you can also define height and thickness of this poly solid using command line options. This command was introduced in AutoCAD This system variable controls the behaviour or 2D curves when 3D tools like Extrude, Presspull and Sweep are used. You can change the value of this system variable so that AutoCAD either retains or deletes curves after converting them to 3D. Using this command you can find the volume of a 3D solid as well as lots of other information like its moment of inertia, radius of gyration, centroid, and products of inertia.
This command can be used to detect intersecting 3D solids. The command is especially useful in situations where you want to detect clashes between different solids like pipes and walls. You can extract edges of a 3D solid as 2D geometries using this tool. In the image shown here the XEDGES tool has been used to extract the edges of the 3D solid and then the solid geometry has been moved to reveal the edges only.
Using this command you can create a section plane in the drawing that can be used to see the 3D drawings by sectioning them along different planes. This command is great for converting a 3D drawing into 2D. Using this command you can also create multiple views of a single 3D drawing like the front, top and isometric on a single plane.
Using this command you can project a 2D curve on a 3D surface, solid or region as shown in the animated image below. Using this command you can convert a 3D solid into a hollow solid with a wall thickness. Alternatively, you can also select the shell tool from the Solid editing panel of the Solid tab. As the name suggests this command can be used to make a helix in AutoCAD drawing. Using this command you can fill the open areas of a surface like the top of a cylinder as shown in this animated image here.
Using this tool you can move faces like a groove of a 3D solid from one point to other as shown in the animated image here. This command is similar to the trim command of 2D drawings but in this case, it will trim surfaces instead of 2D geometries. This command adjusts the smoothness of shaded and rendered objects and shadows. Its default value is 0. The higher the value smoother will be the 3D objects but it will consume more processing power to render them.
Using this command you can align a 3D solid object with respect to another 3D solid, this video explains the use of this command in detail. Using this command you can offset any surface inside, outside or on both sides of the surface as shown in the animated image here. Using this command you can imprint 2D drawings on planar faces of a 3D solid or a surface to create additional faces for 3D tools like Presspull.
Using this tool you can record the history of solids on which boolean operations are performed and you can modify these solids later. In the image, here Subtract operation is performed on two solids and then the amount of removed part is changed by selecting the Cone by pressing CTRL key and then changing its base radius.
The default value of this system variable is 0 off but you can activate it using value 1 ON. It helps the user to set up a camera Perspective view so that the user can view the angle as if looking at it in the real world. This command merges two or more 3D objects connected together into one.
This command subtracts one object from another 3D object provided they have interfering volume. This tool creates a 2D region, surface or 3D solid from the overlapping section. Alternatively, you can also select the shell tool from Solid editing panel of the Solid tab.
Using this command you can fill the open areas of a surface like the top of a cylinder as shown in the animated image below. Using this tool you can move faces like a groove of a 3D solid from one point to other as shown in the animated image below. Using this command you can offset any surface inside, outside or on both sides of the surface as shown in the animated image below.
In the image below Subtract operation is performed on two solids and then the amount of removed part is changed by selecting the Cone by pressing CTRL key then changing its base radius. By default, the value of this system variable is 0 which keeps this feature off but you can turn it on by changing its value to 1. Did we miss any command or tool which should be included in this list? Let us know in the comments below.
It is a nice reference guide for default shortcuts. I wanted to have a clean and easy to use shortcuts manager for AutoCAD which allows to assign single key shortcuts as well as combinations with modifier keys. And to have an interactive reference card. A lot has changed since this article was written, we can do with an updated version for the new program…. Always start by designing the contour lines, thank you for always posting useful information on CAD and how town planners can continue to use it efficiently as a map layout tool when designing land use townships.
Thank you for always posting useful information on CAD and how town planners can continue to use it efficiently as a map layout tool when designing land use townships. Thnak you for always posting useful information on CAD and how town planners can continue to use it efficiently as a map layout tool when designing land use townships. You have done very indepth research and share this great Command and Shortcut list which is helpful for CAD users.
Hello sir ,i m currently pursuing my masters amd i need a good proficiency in autocad can you help me out. You might try taking the sample certification tests you can find on line. That way you will learn your weaknesses and what to study. Amazing sir, this is an amazing article on the internet, today I find out the best short cut key of autocad. What command do I need to use to have the selections get modified?
CUI enter2. And then click your current selected workspace. I think your properties box size , Height and Width are zero. So you need to change that size. Thank you sir. Nice to meet you. The commands are very helpful to me sir. Ur explanation is very easily understanding and thank you sir. Sir, I appreciate you in giving out knowledge to other people to develop on our carrier. Well done sir. Sir, kindly send the PDF of this information above to me. Thank you Taiwo Ogunsakin.
HI Pandey sir Sir I am working in auto cad as civil drafts man. Sir I have issue in auto cad 2D. If i make some data in excel. Please help me out. Would you please share with me the pdf file? Thank You. Never recieved the PDF file with the commands and its not in the spam Please send it as you promise in your page. This is odd as you should have received it on 6 June as I can see the mail has been sent.
Data is encrypted in transit. You can request that data be deleted. I just wanted to view shop drawings but, unless you register and pay, it’s not possible. Now, we need to find a way to transfer car drawings into format we can read on our phones without paying more and more. Anything that has to do with autodesk is expensive and annoying, there is no need to register or pay money just to view drawings!
I love Fusion , and Autocad has always been good, but I didn’t get that same experience with this app. Drawing is difficult.