Looking for:
Adobe photoshop cc 2015 help pdf free
thiS doCument iS a Sample of the book “praCtiCal photoShop CC level 2”. Using These Tutorials with Photoshop. Checking for Free Updates. User Manual: adobe Photoshop – CC () – Help Free User Guide for Photoshop Software, Manual. Course material on Download free Adobe Photoshop CC course tutorial, training, a PDF study material by replace.me to download for free as a pdf file.❿
[PDF] Adobe Photoshop CC free tutorial for Beginners. Adobe photoshop cc 2015 help pdf free
Open method, so the script must create the Photoshop. You could have the red channel active in order to manipulate just the red pixels in the image, or you could choose to manipulate all the channels at once.
❿
Adobe Photoshop CC 2015 in pdf – Adobe photoshop cc 2015 help pdf free
Luckily, you need only a few items — specifically paints, brushes, and a surface to work on. The following sections explain what paints you need and how to use them. Oil-based media contains paint pigments suspended in oil or acrylic solvents. These pigments are ground into very small particles, which are essentially microscopic paintballs. You buy these pigments in small jars and cans, mix them with solvents to create paints, and apply them to a surface, like a canvas or paper, with paintbrushes or other similar tools.
The advantage of using oil-based media is that you can use the paint to create realistic, transparent color effects. Even if you have previously used oil-based media, you should experiment with other forms of paint.
Experimentation is essential to improve your technique, and you should keep your small collection of paints in your studio, ready to use at any time. You can use oil-based media in some of the same ways that you use acrylic paints. You can create a thick paint, like a gesso, or create a thin paint, or even paint and draw. The following sections give you some tips for using oil paints, along with.
The goal of this tutorial is to create a consistent crop design that will work on as many platforms as possible.
This crop design will be used later on as a new header and it will be used on our website and social media accounts. Also, you should keep in mind that the colors of our brand are blue and yellow pale yellow and dark blue and we want a flower that reflects that. From the outside, the flower looks like a 1.
We think about this flower, like the others, as a logo. If you notice, in the horizontal view, you have the blue logo, and on the vertical side you have the yellow logo. The main body of this design is a square box with a circular shape. Set the default fill color to dark grey and create a circle with a radius of 50 pixels, using the Ellipse tool.
We want to do the reverse. You can use the Pen tool to create freeform paths like you would with a pen or marker. The Pen tool is very versatile, as it allows you to create paths of almost any shape and size.
In the simplest mode, the pen tool creates a freeform path that you can modify later on. When you create the path, Photoshop automatically follows the lines you create, creating an invisible guide that you can use to make changes later on. The gradient tool allows you to make an image appear to fade from one color to another. It is useful for making backgrounds or for duplicating existing colors. A gradient tool creates a linear path that you can customize or remove to make paths of any shape.
You can also look up the options for PsDialogModes. JS To set dialog preferences, you use the displayDialogs property of the Application object.
It also describes how to use some properties of the Application object. For further information, look up the properties of the Application object in the reference manual or the object browser of the language you are using. Using the Document object The Document object can represent any open document in Photoshop. You can think of a Document object as a file; you can also think of it as a canvas. For example, you could crop, rotate or flip the canvas, resize the image or canvas, and trim the image.
Open appRef. ResizeImage 4,4 docRef. Trim 1,True,False,True,False ‘the crop command uses unit values ‘so change the ruler units to pixels appRef. Crop Array ,,, ,45,20,20 docRef. FlipCanvas 1 ‘ psHorizontal ‘restore ruler units appRef. When you create a layer you must specify whether you are creating an ArtLayer or a Layer Set.
Add layerObj. SolidColor” colorObj. Application” ‘Make a new document and a first layer in the document appRef. Add appRef.
Add ‘ Move the new layer to after the first layer newLayerSetRef. These numbers act as layer names and do not correspond to the index numbers of ArtLayer objects you create in a script. Your script—VBScript or JavaScript—will always consider the layer at the top of the list in the Layers palette as the first layer in the index. For example, if your document has four layers, the Photoshop application names them Background Layer, Layer 1, Layer 2, and Layer 3.
Normally, Layer 3 would be at the top of the list in the Layers palette because you added it last. Refer to an AppleScript language guide or text book for information on referencing a file using either as alias or to a reference to file. VBS Layers “Layer 3”. The following examples show how to create a Layer Set object, duplicate an existing ArtLayer object, and move the duplicate object into the layer set. ArtLayers 1. You link layers together so that you can move or transform the layers in a single statement.
Add layer1Ref. Additionally, look up Add as a method of the ArtLayers object. Additionally, look up add as a method of the ArtLayers object. Your script can apply styles to an ArtLayer object. NOTE: The layer style names are case sensitive. Please refer to Photoshop Help for a list of styles and for more information about styles and the Styles palette.
VBS docRef. ArtLayers “L1”. JS docRef. Conversely you can change a Text Item object to an ArtLayer object. The Text Item object is a property of the ArtLayer object. Creating a Text Item object The following examples create an ArtLayer object and then use the kind property to convert it to a text layer.
Add newLayerRef. AS if kind of layerRef is text layer then Add textLayerRef. ArtLayers “my text”. When a new text-object is created, its kind property is automatically set to point text. The text-object properties height, width, and leading are valid only when the text item’s kind property is set to paragraph text.
To find the properties and methods you can use with a text layer, look up the TextItem object. Working with Selection objects You use a Selection object to allow your scripts to act only on a specific, selected section of your document or a layer within a document.
For example, you can apply effects to a selection or copy the current selection to the clipboard. Also, look up the selection property of the Document object, and the selection-object. Also, look up the Select as a method of the Selection object. Also, look up the select as a method of the Selection object. The opposite corner, the lower right, is the extreme point of the canvas. The following examples assume that the ruler units have been set to pixels and create a selection by: 1.
Creating a variable to hold a new document that is x pixels in size. Creating a variable to hold the coordinates that describe the selected area that is, the Selection object.
NOTE: The transparency parameter cannot be used for background layers. SolidColor” strokeColor. The values are passed in the ruler units stored in Photoshop preferences and can be changed by your scripts. Selection selRef. Expand 5 selRef. Contract 5 selRef. SolidColor” fillColor. Fill docRef. HistoryStates 10 JS selRef. Add chanRef. Store docRef. Load docRef. Working with Channel objects The Channel object gives you access to much of the available functionality on Photoshop channels.
You can create, delete, and duplicate channels or retrieve a channel’s histogram and change its kind. Changing channel types You can change the kind of any channel except component channels. The following examples demonstrate how to change a masked area channel to a selected area channel: NOTE: Component channels are related to the document mode.
Refer to Photoshop Help for information on channels, channel types, and document modes. The following examples demonstrate how to use the DocumentInfo object to set the copyrighted status and owner URL of a document. Info docInfoRef. Using history state objects Photoshop keeps a history of the actions that affect documents. See Photoshop Help for additional information about History State.
You can use a HistoryStates object to reset a document to a previous state or to fill a Selection object. The following examples revert the document contained in the variable docRef back to the form and properties it had when it was first opened or created.
Using history states in this fashion gives you the ability to undo modifications to the document. HistoryStates 1 JS docRef. ActiveHistoryState docRef. ApplyMotionBlur 20, 20 docRef. First the script ensures that event notification is enabled, then it sets up the event to trigger the execution of the Welcome. Once the script completes, any time you open a document outside of a script, it triggers the notification, which runs the. Application” appRef.
Add “Opn “, eventFile JS app. This requires that you first create an array of PathPointInfo objects, which specify the coordinates of the corners or anchor points of your path. Once you have the points and a subpath, you can add a new PathItem. The following script creates a PathItem object that is a straight line. The line has two points, ‘so there are two PathPointInfo objects.
PathPointInfo” lineArray 0. Anchor lineArray 0. PathPointInfo” lineArray 1. Anchor lineArray 1. This method takes the SubPathInfo object ‘and returns a PathItem object, which is added to the pathItems collection ‘for the document. Each color model has its own set of properties. To set a color in this class, you indicate values for each of the three properties.
To use this object, you first create an instance of a SolidColor object, then set appropriate color model properties for the object. Once a color model has been assigned to a SolidColor object, the SolidColor object cannot be reassigned to a different color model. The following examples demonstrate how to set a color using the CMYK color class.
SolidColor” solidColorRef. A hex value contains three pairs of numbers which represent red, blue and green in that order. In AppleScript, the hex value is represented by the hex value string property in class RGB hex color, and you use the convert color command described below to retrieve the hex value. AS The following script, which assumes an RGB color model, gets the foreground color and then uses the convert command of the color class to convert the color to its CMYK equivalent.
Dim someColor If someColor. The cmyk property of the SolidColor object that foregroundColor refers to provides a way to access the cmyk equivalent of the rgb color. The following statements return true if the foreground color is visually equal to background color. IsEqual appRef. All filter methods belong to the ArtLayer object. The following examples apply the Gaussian blur filter to the active layer. VBS appRef.
The commands can be used to operate on objects within a single document, or to move information between documents. Using the copy and paste commands The following examples copy the contents of the background layer to the clipboard, create a new document, and then paste the clipboard contents to the new document. The scripts assume that there is a document already open in Photoshop and that the document has a background layer. You must use the activate command to activate the application before executing any clipboard commands.
ActiveDocument docRef. ArtLayers “Background”. Add 8, 6, 72, “New Doc” newDocRef. In AppleScript, you use the copy merged command. Unit values All languages support plain numbers for unit values. These values are treated as being of the type currently specified for the appropriate ruler. ResizeImage 3,3 If the ruler units had been set to pixels, the document would be 3 pixels by 3 pixels.
To ensure that your scripts produce the expected results you should check and set the ruler units to the type appropriate for your script. After executing a script the original values of the ruler settings should be restored if changed in the script. Please refer to Photoshop Help for information about available unit value types.
Special unit value types The unit values used by Photoshop are length units, representing values of linear measurement. Support is also included for pixel and percent unit values. These two unit value types are not, strictly speaking, length values but are included because they are used extensively by Photoshop for many operations and values.
AppleScript unit considerations AppleScript provides an additional way of working with unit values. You can provide values with an explicit unit type where unit values are used. Getting the height of the document created above: set docHeight to height of current document returns a value of 5.
In AppleScript, you can optionally ask for a property value as a particular type. The points and picas unit value types are PostScript points, with 72 points per inch. The traditional points and traditional picas unit value types are based on classical type setting values, with You can convert, or coerce, a unit value from one value type to another. For example, the following script converts a point value to an inch value.
This conversion ability is built in to the AppleScript language. NOTE: The unit values cm units and mm units cannot be used in this way with a corresponding reference to cm or mm. They are not supported by the AppleScript terminology. Using unit values in calculations To use a unit value in a calculation in Applescript it is necessary to first convert the value to a number unit value cannot be used directly in calculations.
You cannot, however, convert a pixel or percent value to another length unit value as you can with other length value types. Trying to run the following script will result in an error. For example, if ruler units is set to mm units, and you create a document that is 30 x 30, the value returned for the height or width will be The scripting interface assumes settings are measured by ppi.
Unit values for these properties, unless otherwise indicated in the table, are based the graphics ruler setting. The following table lists the commands that use unit values as parameters or arguments. In some cases the parameters are required. Crop document. ResizeCanvas document. ResizeImage document. Contract selection. Expand selection. Feather selection. SelectBorder selection. Translate selection.
TranslateBoundary selection. Be sure to set the ruler units as needed at the beginning of your scripts and save and restore the original ruler settings when your script has completed.
AS In AppleScript ruler units and type units are properties of the settings-object, accessed through the Application object’s settings property as shown below. Script name Description Layer Comps to Files. Layer Comps to PDF. Layer Comps to WPG. Export Layers to Files. Script Events Manager. Image Processor. Load Files into Stack. Merge to HDR. NOTE: When you finish the lesson in each of the following sections, save the script you have created in the lesson.
Each lesson builds upon the script created in the previous lesson. CHAPTER 3: Scripting Photoshop Advanced Scripting 61 Working with document preferences The sample scripts in this section activate a Photoshop Application object and then save the default configuration settings into variables so that they can be restored later when the script completes.
These are the default configurations you probably set up in the Preferences dialog when you initially installed and configured Photoshop. Next, the scripts set the following preferences to the following values: Preference Set to What it does rulers inches Uses inches as the unit of measurement for graphics.
NOTE: dialog modes is not an option in the Photoshop application. Next, the script declares variables that store document dimensions in inches and document resolution in pixels. The script then declares a display resolution, and assigns the text “Hello, World!
Next, an if statement checks whether a Document object has been created and then creates a new Document object if none exists. Finally, the script restores the original preferences. AS To work with document preferences: 1. Create and run the following script. After viewing the document in Photoshop, close the document without saving it. Save the script as HelloWorldDoc. VBS To work with document preferences: 1. Create the following script. DisplayDialogs ‘set new preferences and document defaults appRef.
Name the script HelloWorldDoc and save it. JS To work with document preferences: 1. Name the script HelloWorldDoc. Save the script.
AS To create and specify details in a text item: 1. Type the following code into the HelloWorldDoc script immediately before the statements at the end of the file that restore original preferences. Run the complete script. Be patient while Photoshop executes your commands one by one. SolidColor” textColor. After viewing the document in Photoshop, close Photoshop without saving the document.
Notice that the LayerKind. Constants are always depicted in upper case letters in Photoshop JavaScripts. NOTE: Because text is a vector graphic and cannot apply a wave filter to vector graphics, we must first convert the image to a bitmap. Rasterizing converts mathematically defined vector artwork to pixels.
For more information on rasterizing, refer to Photoshop Help. NOTE: The wave is a truncated sine curve. Defining the area of a selection object To define the area of a selection object, we create an array of coordinates, or points specified in pixels within the document. The array indicates the coordinates that define the outside corners of a rectangular area that begins at the top left corner of the document and extends half way across the document.
NOTE: You can define any number of points for a selected area. The number of coordinates determines the shape of the selection. The last coordinate defined must be the same as the first so that the area is a closed selection path.
Columns are arranged horizontally. Rows are stacked vertically. Choose Run to run the script. Save the script in the Script Editor. Rasterize 1 ‘create an array to define the selection property ‘of the Document object ‘define the selected area as an array of points in the document docRef.
ApplyWave 1, 1, , 5, 10, , , 1, 1, 0 2. Double click the file name in Windows Explorer to run the script. Notice that the RasterizeType. Type the following code into the script file HelloWorldDoc just above the statements that restore original preferences.
ApplyMotionBlur 45, 5 docRef. Deselect 2. Double click on the file in Windows Explorer to run the script. You create and run actions in the application interface using the Actions palette. You can also manage actions in scripts using a utility called the Action Manager. The Action Manager allows you to write scripts that target Photoshop functionality that is not otherwise accessible in the scripting interface, such as third party plug-ins and filters.
The only requirement for using the Action Manager is that the task that you want to access from the Action Manager is recordable. This chapter describes how to use the Action Manager and the scripting interface objects it includes. ScriptListener records a file with scripting code corresponding to the actions you perform in the UI. Leaving ScriptListener installed continuously will not only create large files that occupy memory on your hard drive, it can slow Photoshop performance.
ScriptListener creates these files on the desktop. To install the ScriptListener: 1. Select the file ScriptListener. Paste the file copy to the following location Open Photoshop. This will allow Photoshop to load the plug-in.
Close Photoshop. Delete the file ScriptListener. Delete the log files ScriptingListenerJS. To prevent the ScriptingListenerJS. For detailed information about these objects, see the appropriate reference manual, or use the object browser for the language you are using.
Recording a Script using ScriptListener The section demonstrates how to create a script log file using ScriptListener. We will record the actions necessary to apply the emboss filter to a document. By default, the Emboss filter is available only via the Photoshop interface. To make the Emboss filter scriptable: 1.
Open Photoshop, then open a document. Name the action, then click Record. Before you begin this section, you need have already recorded an action. The procedures in this section use the Action Manager to make the Emboss filter available to the scripting interface. To create a JavaScript from the ScriptListener output: 1.
If this is not the first action recorded in the log, you can easily locate the most recent action; it follows the final equal sign line. In the emboss.
Substitute the filter specification values with variable names. In the following example, has been replaced with angle; 3 has been replaced with height; has been replaced with amount. Wrap the code in a JavaScript function. In the following example, the function name is emboss. To use a JavaScript to apply the Emboss filter to a document, include the emboss function in the JavaScript and call the function with the desired parameters. For example, the following example applies the Emboss filter with angle 75, height 2, and amount Select Open to run the script.
Before you begin this section, you need to have already recorded an action. Open ScriptingListenerVB. PutInteger id12, Call objApp. In the following example, has been replaced with angle, 3 has been replaced with height, and has been replaced with amount. PutInteger id12, amount Call objApp. Wrap the code in a VBScript function. In the following example, the function name is Emboss. The creation of the Photoshop application object needs to be outside of the function, as we will explain in the next step.
ExecuteAction id9, desc4, dialogMode End Function 5. To use a VBScript to apply the Emboss filter to a document, include the emboss function in the script and call the function with the desired parameters. Before the script calls the function, it needs to have an open document. Since the script is opening a document, it needs access to the Photoshop DOM when it calls the Application.
Open method, so the script must create the Photoshop. Application object before it opens a new document. ExecuteAction id9, desc4, dialogMode End Function 6.
Apply the emboss filter script by double clicking on the file emboss. This launches Photoshop, opens the file and applies the emboss filter to the file. Use the VBscript object browser for more information on the Application.
DoJavaScriptFile method. You will end up with a file emboss.
❿
List of courses – Adobe photoshop cc 2015 help pdf free
Course material on Download free Adobe Photoshop CC course tutorial, training, a PDF study material by replace.me to download for free as a pdf file. Looking for: Adobe Photoshop CC download free tutorial in pdf – Features of Adobe Indesign CC 32 Bit 64 Bit Click here to Download. Course material on Download free Adobe Photoshop CC course tutorial, training, a PDF study material by replace.me to download for free as a pdf file.
❿